Please note: Friday June 18 is a holiday celebrating Juneteenth, please allow extra time for your order to arrive and plan accordingly.
0

Factory Installed blink.uf2
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Factory Installed blink.uf2

by blakebr on Mon May 10, 2021 5:57 pm

Hello,

Where can I find the factory installed *.uf2 test files for the:
QT Py RP2040
ItsyBitsy RP2040
Feather RP2040 boards. The files that randomly flash the NeoPixel when the board comes from the factory.

The source code would be appreciated for learning purposes. I do not have a C++ compiler other than the Arduino one.

Thank you,
Bruce

blakebr
 
Posts: 36
Joined: Tue Apr 17, 2012 6:23 pm

Re: Factory Installed blink.uf2

by kattni on Tue May 11, 2021 11:49 am

Hello.

The Feather UF2 was already in the guide on the Downloads page.

https://learn.adafruit.com/adafruit-fea ... /downloads

I added the ItsyBitsy and QT Py UF2s to their respective Downloads pages.

https://learn.adafruit.com/adafruit-its ... /downloads

https://learn.adafruit.com/adafruit-qt- ... /downloads

~ Kattni

kattni
 
Posts: 106
Joined: Fri Aug 18, 2017 6:33 pm

Re: Factory Installed blink.uf2

by blakebr on Tue May 11, 2021 12:19 pm

Katnni,

I must admit I didn't look on the Feather page, so I am at fault for not RTFM.
Thank you for adding the files to QT Py and ItsyBitsy.

Thank you again for for your help again.

Bruce

blakebr
 
Posts: 36
Joined: Tue Apr 17, 2012 6:23 pm

Re: Factory Installed blink.uf2

by adafruit_support_mike on Tue May 11, 2021 10:19 pm


adafruit_support_mike
 
Posts: 62799
Joined: Thu Feb 11, 2010 2:51 pm

Re: Factory Installed blink.uf2

by blakebr on Wed May 12, 2021 8:55 am

Mike,

Sorry, but Kattni beat you to the punch.
Go Kattni! ;-)

Thanks to both of you for your help,

Bruce

blakebr
 
Posts: 36
Joined: Tue Apr 17, 2012 6:23 pm

Re: Factory Installed blink.uf2

by blakebr on Thu Jun 10, 2021 6:57 pm

Hello,

Is there a way I can get a copy of the source code to the factory installed blink routines.
I assume that same code is used for each RP2040 device with their respective version of CircuitPython adjusting for pin usage.

Thanks for your help,

Bruce

blakebr
 
Posts: 36
Joined: Tue Apr 17, 2012 6:23 pm

Please be positive and constructive with your questions and comments.