FunHouse from AdaBox018 won't show on Windows

CircuitPython on hardware including Adafruit's boards, and CircuitPython libraries using Blinka on host computers.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
gwennkoi
 
Posts: 2
Joined: Mon Dec 03, 2012 5:04 pm

FunHouse from AdaBox018 won't show on Windows

Post by gwennkoi »

ORDER #2568978-9849752875

I've tried hooking the device up to a couple different Windows 10 computers using a couple different cables and the drive for it does not show up. Additionally, the slider 10-13 on the test UI aren't showing up for 11 and 13 and barely detects for 12.

Not sure what to do at this point.

User avatar
dastels
 
Posts: 15608
Joined: Tue Oct 20, 2015 3:22 pm

Re: FunHouse from AdaBox018 won't show on Windows

Post by dastels »

There's a general CircuitPython troubleshooting guide here: https://learn.adafruit.com/welcome-to-c ... leshooting

Did you read through and follow the guide? Especially the "CircuitPython" page.

Dave

User avatar
grueproof
 
Posts: 1
Joined: Wed Sep 30, 2020 4:17 pm

Re: FunHouse from AdaBox018 won't show on Windows

Post by grueproof »

Order: 2557970-3353802573

Had the same issue. For anyone else having it, this worked for me: https://learn.adafruit.com/adafruit-fun ... bootloader

User avatar
gwennkoi
 
Posts: 2
Joined: Mon Dec 03, 2012 5:04 pm

Re: FunHouse from AdaBox018 won't show on Windows

Post by gwennkoi »

I was able to erase the flash and re-flash it with a new copy of the boot loader and it still has the same issues.

Locked
Please be positive and constructive with your questions and comments.

Return to “Adafruit CircuitPython”