ORDER #2568978-9849752875
I've tried hooking the device up to a couple different Windows 10 computers using a couple different cables and the drive for it does not show up. Additionally, the slider 10-13 on the test UI aren't showing up for 11 and 13 and barely detects for 12.
Not sure what to do at this point.
FunHouse from AdaBox018 won't show on Windows
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- gwennkoi
- Posts: 2
- Joined: Mon Dec 03, 2012 5:04 pm
- dastels
- Posts: 15608
- Joined: Tue Oct 20, 2015 3:22 pm
Re: FunHouse from AdaBox018 won't show on Windows
There's a general CircuitPython troubleshooting guide here: https://learn.adafruit.com/welcome-to-c ... leshooting
Did you read through and follow the guide? Especially the "CircuitPython" page.
Dave
Did you read through and follow the guide? Especially the "CircuitPython" page.
Dave
- grueproof
- Posts: 1
- Joined: Wed Sep 30, 2020 4:17 pm
Re: FunHouse from AdaBox018 won't show on Windows
Order: 2557970-3353802573
Had the same issue. For anyone else having it, this worked for me: https://learn.adafruit.com/adafruit-fun ... bootloader
Had the same issue. For anyone else having it, this worked for me: https://learn.adafruit.com/adafruit-fun ... bootloader
- gwennkoi
- Posts: 2
- Joined: Mon Dec 03, 2012 5:04 pm
Re: FunHouse from AdaBox018 won't show on Windows
I was able to erase the flash and re-flash it with a new copy of the boot loader and it still has the same issues.
Please be positive and constructive with your questions and comments.