I Built the SDR Tuner with the Gemma M0 and the potentiometer. I downloaded the latest version of CircuitPython, loaded the HID library, loaded the code from the page. But I am not seeing the key commands. My Mac sees the device as a USB (data below) but it is not seeing it as an HID device as in a keyboard.
How do I get my Mac to see it as a keyboard device? I am running Catalina 10.15.7 on a MacBook Air.
Gemma M0:
Product ID: 0x801d
Vendor ID: 0x239a
Version: 1.00
Serial Number: 6AE710EB451535050213E233C28130FF
Speed: Up to 12 Mb/s
Manufacturer: Adafruit Industries LLC
Location ID: 0x14220000 / 47
Current Available (mA): 500
Current Required (mA): 100
Extra Operating Current (mA): 0
Media:
Gemma M0:
Capacity: 66 KB (66,048 bytes)
Removable Media: Yes
BSD Name: disk2
Logical Unit: 0
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
USB Interface: 2
Volumes:
CIRCUITPY:
Capacity: 66 KB (65,536 bytes)
Free: 14 KB (13,824 bytes)
Writable: Yes
File System: MS-DOS FAT12
BSD Name: disk2s1
Mount Point: /Volumes/CIRCUITPY
Content: DOS_FAT_12
Volume UUID: 31548AC8-509C-350B-8EEB-BC8D32E6BFE5
SDR Tuner not working with Mac
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- CircuitCity21
- Posts: 2
- Joined: Sat Jul 31, 2021 3:03 pm
SDR Tuner not working with Mac
- Attachments
-
- Screen Shot 2021-07-31 at 3.05.23 PM.png (671.68 KiB) Viewed 72 times
- CircuitCity21
- Posts: 2
- Joined: Sat Jul 31, 2021 3:03 pm
Re: SDR Tuner not working with Mac
Solved this myself! I am new to this, I removed the code.py which was in the same folder as main.py. As soon as I did that it worked! I wish I could rewrite the instructions for the SDR Tuner Knob. Its very backwards and assumes a lot. That is common when an expert writes instructions for a beginner.
- Franklin97355
- Posts: 23940
- Joined: Mon Apr 21, 2008 2:33 pm
Re: SDR Tuner not working with Mac
Thanks, I'll give the authors a heads-up.
Please be positive and constructive with your questions and comments.