Hi,
I've got many different boards running CircuitPython.
Sometimes one of them is no longer recognised by my PC. The COM port remains visible, but no drive...
In this case I use a UF2 file which erases the entire Flash memory, but I spend time looking for this file in your website.
Is there a web page that centralizes all these files for each of your cards?
Thank you for your answer.
Mike
Erase Flash UF2 file
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dastels
- Posts: 15821
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Erase Flash UF2 file
There is most likely some relevant information on the CircuitPython troubleshooting page: https://learn.adafruit.com/welcome-to-c ... leshooting, specifically this section: https://learn.adafruit.com/welcome-to-c ... 2987288-32.
Dave
Dave
- AmazingCircuitPythonFR35
- Posts: 99
- Joined: Thu Feb 05, 2015 10:18 am
Re: Erase Flash UF2 file
Thanks a lot Dave.dastels wrote:There is most likely some relevant information on the CircuitPython troubleshooting page: https://learn.adafruit.com/welcome-to-c ... leshooting, specifically this section: https://learn.adafruit.com/welcome-to-c ... 2987288-32.
Dave
And is there a place to find a uf2 file to erase the flash memory for other boards than Adafruit's boards ?
I know for example the 'flash_nuke.uf2' for the raspberry pico.
Mike
- dastels
- Posts: 15821
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Erase Flash UF2 file
If it's a CircutiPython board and you can get to the REPL you can use storage.erase_filesystem(). Other than that I don't know.
Dave
Dave
- AmazingCircuitPythonFR35
- Posts: 99
- Joined: Thu Feb 05, 2015 10:18 am
Re: Erase Flash UF2 file
Thanks Dave and have a nice day.dastels wrote:If it's a CircutiPython board and you can get to the REPL you can use storage.erase_filesystem(). Other than that I don't know.
Dave
Please be positive and constructive with your questions and comments.