Voting resources, early voting, and poll worker information - VOTE. ... Adafruit is open and shipping.
0

Problems with AirLift BitsyWing
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: Problems with AirLift BitsyWing

by adafruitguy on Wed Jul 29, 2020 3:35 pm

ItsyBitsy nRF52840 with Arduino 1.8.13 is looking good...

15:23:39.519 -> WiFi Scanning test
15:23:40.279 -> 1.2.2
15:23:40.279 -> Firmware OK
15:23:40.279 -> MAC: A4:CF:12:85:F7:10
15:23:40.279 -> Scanning available networks...
15:23:40.279 -> ** Scan Networks **
15:23:44.967 -> number of available networks:8
. . .


Thanks Brent, I will confirm the ItsyBitsy M0 a little later.

adafruitguy
 
Posts: 88
Joined: Sat Jun 07, 2014 7:52 am

Re: Problems with AirLift BitsyWing

by brubell on Wed Jul 29, 2020 3:41 pm

no problem! This PR has been merged into the master branch, too.

brubell
 
Posts: 1040
Joined: Fri Jul 17, 2015 10:33 pm

Re: Problems with AirLift BitsyWing

by adafruitguy on Wed Jul 29, 2020 6:38 pm

Thumbs-up on ItsyBitsy M0 too! Thanks again.

18:31:25.270 -> WiFi Scanning test
18:31:26.040 -> 1.2.2
18:31:26.040 -> Firmware OK
18:31:26.040 -> MAC: A4:CF:12:84:E5:BC
18:31:26.040 -> Scanning available networks...
18:31:26.040 -> ** Scan Networks **
18:31:30.728 -> number of available networks:8
. . .

adafruitguy
 
Posts: 88
Joined: Sat Jun 07, 2014 7:52 am

Re: Problems with AirLift BitsyWing

by adafruitguy on Wed Jul 29, 2020 8:49 pm

Arduino Passthrough (SerialESPPassthrough.ino) looks like it could use a little M0 and nRF52 Bitsy love too...

https://learn.adafruit.com/adafruit-air ... t-firmware

adafruitguy
 
Posts: 88
Joined: Sat Jun 07, 2014 7:52 am

Re: Problems with AirLift BitsyWing

by brubell on Thu Jul 30, 2020 12:44 pm

adafruitguy wrote:Arduino Passthrough (SerialESPPassthrough.ino) looks like it could use a little M0 and nRF52 Bitsy love too...

https://learn.adafruit.com/adafruit-air ... t-firmware


yep, thanks, pr'd over at https://github.com/adafruit/Adafruit_Le ... /pull/1194

brubell
 
Posts: 1040
Joined: Fri Jul 17, 2015 10:33 pm

Please be positive and constructive with your questions and comments.