I saw this post and wanted to tag onto it but it was locked - viewtopic.php?f=64&t=150180&p=741438&hilit=tft#p741438
Total noob here so hit me over the head gently if this is obvious.
I have the following hardware:
m4 express feather
joywing
2.4" feather tft
My goal is to create a moonlander like game on this hardware. I suspect that this isn't possible to do using makecode arcade?
My best option is to setup with circuit python and figure it out from there?
Thank you!
m4Express - Feather Wing TFT + Joywing?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- johnpark
- Posts: 985
- Joined: Wed Mar 25, 2009 2:15 pm
Re: m4Express - Feather Wing TFT + Joywing?
I haven't tried that particular setup, but this guide may give you an idea of how to get going with it.
https://learn.adafruit.com/makecode-arc ... m4-express
The biggest challenge may be in the pin mappings which are hard coded into the Arcade board definition for using the Feather M4 Express.
https://learn.adafruit.com/makecode-arc ... m4-express
The biggest challenge may be in the pin mappings which are hard coded into the Arcade board definition for using the Feather M4 Express.
Please be positive and constructive with your questions and comments.