After replacing demoboot bin with adafruit-wippersnapper-esp32s2-magtag-1-0-0-beta.3.uf2 from bootloader mode, the first reset results in solid red indictors.
Subsequent resets result in a flash of blue/cyan followed by a reset.
The WIPPER drive appears briefly.
Same process (with proper .uf2) works fine for FunHouse.
The MagTag is the newer version w/ black mask.
https://www.adafruit.com/product/4819
Bootloop on Magtag
Moderators: adafruit_support_bill, adafruit
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
22 posts
• Page 1 of 2 • 1, 2
Please be positive and constructive with your questions and comments.
Did you have the same issue with loading beta.2 (attached)?
- Attachments
-
adafruit-wippersnapper-esp32s2-magtag-1-0-0-beta+2.uf2- (1.83 MiB) Downloaded 6 times
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
Also, which operating system is on your host PC?
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
Win10. Will try loading the other file later today.
-
ceedon - Posts: 4
- Joined: Thu May 20, 2021 10:29 pm
Same behavior in the loop. Green+Blue lights flash -> reset. No solid red first time, though.
-
ceedon - Posts: 4
- Joined: Thu May 20, 2021 10:29 pm
ceedon wrote:Same behavior in the loop. Green+Blue lights flash -> reset. No solid red first time, though.
What's the output of the 'wippersnapper_boot_out.txt' file on the WIPPER drive?
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
It doesn't stay up long enough to grab it. Any tips to work around that? Can figure out a script if not.
Can try from linux as well. Haven't done so yet.
Can try from linux as well. Haven't done so yet.
-
ceedon - Posts: 4
- Joined: Thu May 20, 2021 10:29 pm
I'm having the same issues with Beta.2 and Beta.3.
-
shamste - Posts: 8
- Joined: Wed Jan 13, 2021 12:34 am
I'm having the same issue as well. I'm loading it from a Mac running latest OS.
-
scottlnrd - Posts: 7
- Joined: Mon Mar 10, 2014 10:37 pm
shamste wrote:I'm having the same issues with Beta.2 and Beta.3.
Also with MagTag?
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
scottlnrd wrote:I'm having the same issue as well. I'm loading it from a Mac running latest OS.
Also with MagTag?
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
I completely erased my MagTag and started from scratch. After I drag the Wippersnapper beta onto the drive and it reboots, the Magtag flashes it's LEDs two blueish colors for several times until it finally stops the cycle, ending in all red LEDs. But never mounts the drive long enough to see anything on it.
-
scottlnrd - Posts: 7
- Joined: Mon Mar 10, 2014 10:37 pm
ceedon wrote:It doesn't stay up long enough to grab it. Any tips to work around that? Can figure out a script if not.
Can try from linux as well. Haven't done so yet.
Any luck on Linux?
-
brubell - Posts: 1659
- Joined: Fri Jul 17, 2015 10:33 pm
I don't think this is an issue of what OS it's running from. It would seem to be a boot loader issue from the wippersnapper uf2 file. There are also at least a couple revisions of this device if I'm reading correctly. Could it be that wippersnapper only works on one of them?
-
scottlnrd - Posts: 7
- Joined: Mon Mar 10, 2014 10:37 pm
22 posts
• Page 1 of 2 • 1, 2
Please be positive and constructive with your questions and comments.