Sht40 Moderators: adafruit_support_bill, adafruit

[TheGodmothersGarden]

After many weeks trying I finally got my UM feather s2 to work with wippersnapper. But it does not have the sht40 as a device i can add. Is there a way to possibly add it another way?

[mikeysklar]

You can request support for the SHT40. Please open an issue with the github repo.

https://github.com/adafruit/Adafruit_Wi ... ino/issues

[brubell]

WipperSnapper does not yet support the SHT40 sensor. We have an open request for it here: https://github.com/adafruit/Wippersnapp ... /issues/17. However, there's no ETA on this being officially added just yet, likely over the summer we'll go through and add sensors.

If you're feeling adventurous, we wrote a guide on adding a component to WipperSnapper: https://learn.adafruit.com/how-to-add-a ... persnapper. Another user added the BME680 to WipperSnapper this week by following this guide.

@mikeysklar FYI for future queries like this - we use this repo (https://github.com/adafruit/Wippersnapp ... nts/issues) for Component Requests. We have a separate repo for Board Requests. The WipperSnapper Arduino repo contains the WipperSnapper firmware and is for issues with the firmware.

[mikeysklar]

@brubell,

Thank you for the distinction in github repos. I'll be more careful which ones to guide requests towards.

[TheGodmothersGarden]

I spent all night and i am still super lost I am willing to pay someone for some help. or maybe someone can recommend another way i can read the data wirelessly from my um esp32 s2 with the sht40.

I can either get it to connect to an mqtt server or read temp and humidity unfortunately not both

[TheGodmothersGarden]

You can request support for the SHT40. Please open an issue with the github repo.

https://github.com/adafruit/Adafruit_Wi ... ino/issues

I requested it but then wrote my own code it passed the test waiting for an admin to add it

[TheGodmothersGarden]

and a driver