0

Solved* - Scale issue on a x0x 1.01
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.

Solved* - Scale issue on a x0x 1.01

by GdH on Fri Mar 24, 2017 7:00 pm

Guys, whats up. Thanx for checking this !

Bought a 2nd hand xoxbox (1.01) the other day.
Scale was out of tune; been trying to tune it with antto's AS_x0x software, followed instructions etc.
The very best I can do turning TM5 for scale is 1011 - 1955 (instead of the hoped for 1000 - 2000) I can not turn it further which should result in making the scale as it should be.

Ive been reading a bunch of threads on similar topics and such, but didnt coma across someone with the same problem.
Any information is very welcome and thanx for reading.
Cheers!
Gauthier
Belgium
Last edited by GdH on Sun Mar 26, 2017 10:23 am, edited 1 time in total.

GdH
 
Posts: 2
Joined: Fri Mar 24, 2017 5:47 pm

Re: Scale issue on a x0x 1.01

by GdH on Sat Mar 25, 2017 6:26 pm

Nevermind. Managed to tune it using TM6 as well.
Cheers!

GdH
 
Posts: 2
Joined: Fri Mar 24, 2017 5:47 pm

Re: Solved* - Scale issue on a x0x 1.01

by Mixuk on Thu Apr 20, 2017 5:43 am

I have repeated the same problem that you have. Interestingly, this could be due to the fact that lately I've increasingly started to use a proxy server to access the network? My ip is obtained unreal. Myself doubt it, but anything can happen.

Mixuk
 
Posts: 1
Joined: Thu Apr 20, 2017 5:40 am

Please be positive and constructive with your questions and comments.