x0xb0x not responding to MIDI

x0x0x0x0x0x

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
User avatar
midiquestions
 
Posts: 22
Joined: Thu Oct 23, 2014 1:26 am

x0xb0x not responding to MIDI

Post by midiquestions »

Hi, I recently rewired my studio and discovered that my x0xb0x is not responding to MIDI for some reason, either in note-play mode (on any channel) or in MIDI-sync pattern mode. The cables and the port itself seem to be fine as the THRU function is working to pass notes, so apparently it is receiving MIDI OK at the IN port, but for some reason, these are not reaching the x0x's brain. Any ideas on what is going on and how to fix it?

User avatar
TeeDogg
 
Posts: 1
Joined: Sun Jan 28, 2018 10:59 pm

Re: x0xb0x not responding to MIDI

Post by TeeDogg »

Any luck getting a response with this? Have you figured it out? I'm having the same problem with a X0xi0 I just got.

User avatar
midiquestions
 
Posts: 22
Joined: Thu Oct 23, 2014 1:26 am

Re: x0xb0x not responding to MIDI

Post by midiquestions »

Yes, antto suggested I check continuity on J3, which passes along the MIDI signals internally. Sure enough, I touched up the solder points on both ends of the cable, it now it's responding to MIDI notes and sequence-start commands again.

Locked
Please be positive and constructive with your questions and comments.

Return to “General x0xing”