Hello there, I am almost finished with my x0xb0x build and realized that I just have the blank EEPROM, but I can't seem to find the bootloader files or any resources on how to get them on there. I've built synths in the past and have an Olimex AVR-ISP-MK2 (although I vaguely remember seeing that I'd need a different one for this EEPROM, I may remember that wrong, though), so I'm sure I could get it going if pointed in the right direction.
Any help would be greatly appreciated!
EEPROM help
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: EEPROM help
The eeprom IC is just used for pattern storage.
You probably mean the atmel mcu.
The bootloader is here: https://github.com/a1k0n/x0xb0x/tree/master/bootloader
You can probably find the info on how to flash it when you google or search on this forum. I don't know any links for it.
You probably mean the atmel mcu.
The bootloader is here: https://github.com/a1k0n/x0xb0x/tree/master/bootloader
You can probably find the info on how to flash it when you google or search on this forum. I don't know any links for it.
- drewtstew
- Posts: 4
- Joined: Thu Jan 23, 2020 5:41 pm
Re: EEPROM help
I have the Atmel chip programmed, I got it from Willzyx that way. Does that mean the EEPROM doesn't need any specific firmware loaded on it and it will hold the patterns as I create and save them? If so, awesome!rv0 wrote:The eeprom IC is just used for pattern storage.
You probably mean the atmel mcu.
The bootloader is here: https://github.com/a1k0n/x0xb0x/tree/master/bootloader
You can probably find the info on how to flash it when you google or search on this forum. I don't know any links for it.
Please be positive and constructive with your questions and comments.