BANNED

x0x0x0x0x0x

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

knock knock ... error etc etc ...
retry and again the stop loading ...
my xox is frozen... every func dont start!

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

I follow the test guide... in all section ... and finally my xox doesnt work ...
please help me!
I hope in your helpfull

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

pc said me: ARE YOU SURE IN BOOTLOAD MODE?
yes i'm in bootload ...

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: BANNED

Post by antto »

okay, to clear things up
- at first, your x0xb0x was working in all modes (pattern play, random mode, pattern edit, etc..)
- then you ran BANNED and tried to update the OS - what did BANNED do exactly?

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

is possible make a video of this situation???

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: BANNED

Post by antto »

this video demonstrates the main things you need to know:
http://www.youtube.com/watch?v=9LuWMUQQ750

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

ok...!
soon I make a video for my situation ...

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

i've try and retry but nothing... conbox tell me: KNOCK KNOCK ETC ETC ERROR ...
I watch and follow the video guide on youtube but this insnt my problem ...
my xox not respond!! in every funcs ... it doesnt play !!!!
please help me to go out of this fu******* situation !!!!
I want start from zero...
:( :( :(

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: BANNED

Post by antto »

probably the bootloader has gotten corrupted :?

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

What should I do?
show me the procedure starting from zero.
I have a W7.
thanks

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: BANNED

Post by antto »

well, the procedure..
first you have to install the USB<->Serial drivers from FTDI, this is for the x0xb0x to be recognized as a "Serial port" device in the OS
then, you plug the x0xb0x via USB and it should be recognized
then, run BANNED and configure the port name to match the port name of this new serial port

from that point, it should work

i've written these instructions in the BANNED readme file too iirc

but if your cpu has gone corrupted (i'm not 100% sure, but that's how it looks) you can do 2 things:
1) use a "programmer" device to erase the chip and program the bootloader again
2) buy a new cpu which is pre-flashed with the bootloader

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

i've retry....
the xox is connect to conbox
opening serial port \\.\com3 @ 19200
success
firmware version...
unknown FW
v1.05
detecting pattern size...


and now i'm inside the editor...

the port is okay and all trasmission...
but my xox is frozen!!!... wtf

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

and now i've try to go: upload firmware
... when i click on the file .hex the conbox said me:
knock knock ... the deviceID string etc etc

what is this?

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: BANNED

Post by antto »

if it says that it can't get the DeviceID string - that probably means that there's no reply from the bootloader
this can happen if the x0x is running the firmware, or if there's no bootloader at all

"(auto) unknown FW" <- this means that BANNED failed to autodetect the firmware, which can happen if you are skipping the normal procedures, which happens when the x0x doesn't reply in any of the expected ways (or doesn't reply at all)

alejappo
 
Posts: 21
Joined: Thu May 30, 2013 5:32 pm

Re: BANNED

Post by alejappo »

and then how do you solve this situation?
I do not understand anything ...
I need specific files? software? Drivers?
link they please

Locked
Please be positive and constructive with your questions and comments.

Return to “General x0xing”