BA662 Clown (BA662 clone with DC offset trim)

x0x0x0x0x0x

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
User avatar
altitude
 
Posts: 995
Joined: Wed May 11, 2005 5:17 pm

BA662 Clown (BA662 clone with DC offset trim)

Post by altitude »

This is a modified version of Guest's excellent BA662 clone with the DC offset trimmer and resistor (aka declick mod) so you can drop it right in, trim off the thump and enjoy your BA662ness. Boards are $1.55 for 3 and parts come to all of $8.

https://oshpark.com/shared_projects/QCnNP4oK
Image
Image
Image

User avatar
substyler
 
Posts: 428
Joined: Tue Dec 02, 2008 6:29 pm

Re: BA662 Clown (BA662 clone with DC offset trim)

Post by substyler »

great stuff!

User avatar
ntnh
 
Posts: 3
Joined: Fri Oct 26, 2018 3:42 am

Re: BA662 Clown (BA662 clone with DC offset trim)

Post by ntnh »

Nice. What's the impact of the trim? Slower?

User avatar
altitude
 
Posts: 995
Joined: Wed May 11, 2005 5:17 pm

Re: BA662 Clown (BA662 clone with DC offset trim)

Post by altitude »

Trims off the DC offset so you dont get the VCA thump

User avatar
ntnh
 
Posts: 3
Joined: Fri Oct 26, 2018 3:42 am

Re: BA662 Clown (BA662 clone with DC offset trim)

Post by ntnh »

Interesting. Just listened to some example and I hear what you're talking about.

Do you have a BOM? Otherwise will track down the Open Music Labs. Curious what trimmer you're using though.

Thanks!

User avatar
ntnh
 
Posts: 3
Joined: Fri Oct 26, 2018 3:42 am

Re: BA662 Clown (BA662 clone with DC offset trim)

Post by ntnh »

Saw it listed on the RE-303 version of your board. Pasting here in case others come across this thread, cheers!

Digikey parts:
311-10MGRCT-ND 10M 0603 resistor
3223J-1-503ECT-ND trimmer, top adjust

Locked
Please be positive and constructive with your questions and comments.

Return to “General x0xing”