0

Adafruit 3.5inch PiTFT Replacement PCB
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Adafruit 3.5inch PiTFT Replacement PCB

by EdwinSL101 on Sat Jul 31, 2021 6:17 pm

Hello. So, I have somewhat a dilemma with my 3.5 PiTFT Plus screen. Long story short, I damaged the PCB rendering my PiTFT useless. So, I was wondering if there was any way I could acquire a PCB replacement from you guys, OR if its possible printing the PCB from somewhere else using the PCB files found on GitHub (https://github.com/adafruit/Adafruit-PiTFT-3.5-Plus-PCB). Any help is very appreciated. =)

EdwinSL101
 
Posts: 10
Joined: Fri Aug 16, 2019 1:43 pm

Re: Adafruit 3.5inch PiTFT Replacement PCB

by adafruit_support_mike on Mon Aug 02, 2021 12:37 am

We don't sell the PCBs as a separate product.

You could certainly have a board house assemble one from our design files, but that's very likely to cost more than a new PiTFT. Board etching and assembly have a lot of setup costs, so the rule of thumb is that one prototype costs about the same as the first 100.

adafruit_support_mike
 
Posts: 63716
Joined: Thu Feb 11, 2010 2:51 pm

Please be positive and constructive with your questions and comments.