Hi. I'm working on an NFC project with a friend. They purchased an Adafruit PN532 RFID/NFC Breakout and Shield (https://learn.adafruit.com/adafruit-pn5 ... c/overview) vs just the breakout board. Is it possible to still use this shield on a raspberry pi? How would you go about doing it?
Thanks.
NFC Shield and raspberry pi 3
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: NFC Shield and raspberry pi 3
Yeah, the breakout can work with a RasPi.
It's usually easiest to use a Serial connection between them. This tutorial shows how to set things up:
https://learn.adafruit.com/adafruit-nfc ... i/overview
It's usually easiest to use a Serial connection between them. This tutorial shows how to set things up:
https://learn.adafruit.com/adafruit-nfc ... i/overview
Please be positive and constructive with your questions and comments.