0

help please new thanks for help
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

help please new thanks for help

by angelstar on Tue Feb 12, 2019 1:09 pm

hello sorry for my english i m french
the product flora 2 if i put more 10 product it will give problem power?
if i put flora 2 sewn textile and i put it on washing machine, the flora 2 are not impermeable
will be distroy? all the product flora neopixel are not impermeable, can be in the washing machine?
thanks for help

angelstar
 
Posts: 13
Joined: Tue Feb 12, 2019 1:00 pm

Re: help please new thanks for help

by adafruit_support_bill on Tue Feb 12, 2019 1:45 pm

the product flora 2 if i put more 10 product it will give problem power?

I'm sorry. I don't understand the question. Can you explain in more detail?

if i put flora 2 sewn textile and i put it on washing machine, the flora 2 are not impermeable
will be distroy? all the product flora neopixel are not impermeable, can be in the washing machine?

If you disconnect all batteries and other power sources, you can hand-wash or gently machine wash the Flora. But please allow everything to dry completely before re-connecting power to the circuit:

https://learn.adafruit.com/washing-wear ... s/overview

adafruit_support_bill
 
Posts: 71765
Joined: Sat Feb 07, 2009 10:11 am

Re: help please new thanks for help

by angelstar on Wed Feb 27, 2019 1:42 pm

thanks for answer
if i put in serie flora, i do not have to put more than 10 in serie
even if there is problem with power alimentation?
need more power ?
can work with DC 5volt 10 A 50 watt?
thanks jean

angelstar
 
Posts: 13
Joined: Tue Feb 12, 2019 1:00 pm

Re: help please new thanks for help

by adafruit_support_bill on Wed Feb 27, 2019 3:12 pm

if i put in serie flora, i do not have to put more than 10 in serie
even if there is problem with power alimentation?
need more power ?

Are you referring to the Flora Neopixels? : https://www.adafruit.com/product/1260
The power for these is wired in parallel. You need about 60mA per pixel for maximum brightness. So for 10 pixels you would need 5v @ 0.6A.

adafruit_support_bill
 
Posts: 71765
Joined: Sat Feb 07, 2009 10:11 am

Re: help please new thanks for help

by angelstar on Thu Feb 28, 2019 4:54 am

thanks for help
just to know please with flora 2
if i put 10 or more product the website adafruit says
that i give problem, and need more power over 10 product in serie?
thanks
jean

angelstar
 
Posts: 13
Joined: Tue Feb 12, 2019 1:00 pm

Re: help please new thanks for help

by angelstar on Thu Feb 28, 2019 4:57 am

another question
flora 2 or neopixel are the same led ws21812 B led?
i have this product who work with 5volt 10 Amp 50 watt
https://www.amazon.fr/gp/product/B01CDT ... ZTR8&psc=1
i want to put after this product some flora 2 , possible?
thanks

angelstar
 
Posts: 13
Joined: Tue Feb 12, 2019 1:00 pm

Re: help please new thanks for help

by adafruit_support_bill on Thu Feb 28, 2019 7:21 am

just to know please with flora 2
if i put 10 or more product the website adafruit says
that i give problem, and need more power over 10 product in serie?

Please show me where it says that.
As stated above, to power these pixels, you wire them in parallel - not in series.
At most, they will need 60mA each.

flora 2 or neopixel are the same led ws21812 B led?

Yes. They are the same ws2112B LEDs.

i have this product who work with 5volt 10 Amp 50 watt
https://www.amazon.fr/gp/product/B01CDT ... ZTR8&psc=1

With 144 pixels, it can draw as much as 60mA * 144 = 8640mA = 8.64A.

i want to put after this product some flora 2 , possible?

It should be possible to use those with the Flora pixels - if you power them all from the same source.

adafruit_support_bill
 
Posts: 71765
Joined: Sat Feb 07, 2009 10:11 am

Re: help please new thanks for help

by angelstar on Thu Feb 28, 2019 8:43 am

thanks a lot

angelstar
 
Posts: 13
Joined: Tue Feb 12, 2019 1:00 pm

Please be positive and constructive with your questions and comments.