0

PCB /w usb mal plug print on it
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

PCB /w usb mal plug print on it

by boblatige on Thu Sep 02, 2010 1:37 pm

Hi,
I wanna do a PCB look like usb stick, example : http://spiffie.org/kits/stickduino/

But i don't know who "large" the pcb need to be to make connection with the USB female connector, 1mm or 1,6mm
boblatige
 
Posts: 1
Joined: Thu Sep 02, 2010 1:29 pm

Re: PCB /w usb mal plug print on it

by zener on Thu Sep 02, 2010 1:39 pm

I am guessing the 1.6mm. You could get some material of the two thincknesses and try them. Stack 3 or 5 business cards for example.

zener
 
Posts: 4532
Joined: Sat Feb 21, 2009 2:38 am

Re: PCB /w usb mal plug print on it

by uhe on Thu Sep 02, 2010 3:56 pm

I'd say 1,95+/-0,05mm :)
"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison
uhe
 
Posts: 178
Joined: Mon Sep 03, 2007 4:50 pm
Location: metric world

Please be positive and constructive with your questions and comments.