Audio FX board
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mike6443
- Posts: 1
- Joined: Sat Jun 05, 2021 5:14 pm
Audio FX board
Your web site for this product says, "As of June 14, 2017 we're setting the gain of the amplifier to 6dB as some people accidentally blew out the amplifier. If you cannot normalize your audio to be louder you can remove the solder jumper". But where is this jumper? I didn't see it shown on the product PDF.
- dastels
- Posts: 15828
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Audio FX board
G0 and G1 on the bottom of the board. See the bottom right of the schematic at https://learn.adafruit.com/assets/21011 for information on the effect of (dis)connecting them.
Dave
Dave
Please be positive and constructive with your questions and comments.