I just got a greatfet one in the mail, but it seems to be doa,
The 5v and 3.3v rails show power but it doesn't show up in windows device manager at all.
I assume when its plugged in as is traditional something should at least blink if it is working?
Greatfet one seems to be DOA
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- marshaj847
- Posts: 43
- Joined: Wed Jul 31, 2013 6:12 pm
Re: Greatfet one seems to be DOA
You probably need to install various drivers... see
https://greatscottgadgets.github.io/greatfet-tutorials/
https://greatscottgadgets.github.io/greatfet-tutorials/
- kergadon
- Posts: 3
- Joined: Tue Dec 02, 2014 2:41 pm
Re: Greatfet one seems to be DOA
So I've tried setting up the drivers and even tried 3 different systems nothing seems to see the board at all. I'd like to get a replacement but the "damaged product" support page tells me to post here.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: Greatfet one seems to be DOA
says
"Check your GreatFET One
Once connected, your GreatFET One should start to slowly flash LED1, indicating that it is operating. "
ya tried both USB ports?
"Check your GreatFET One
Once connected, your GreatFET One should start to slowly flash LED1, indicating that it is operating. "
ya tried both USB ports?
- kergadon
- Posts: 3
- Joined: Tue Dec 02, 2014 2:41 pm
Re: Greatfet one seems to be DOA
Yep, nothing comes up at all. No lights nothing, power supply seems to work but the main chip seems to be dead
Please be positive and constructive with your questions and comments.