In the video for this project, a speaker is shown as one of the components of the assembly.
The speaker and the respective wires for connection to the BrainCraft module/Raspberrt Pi 4 are not given in the Parts List.
Would it be possible to provide this. I need to place an order for this component.
Thanks
Machine Learning Camera
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mikeysklar
- Posts: 14194
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Machine Learning Camera
@jprema,
The audio is being played through the Braincrafts builtin speaker.
https://learn.adafruit.com/adafruit-bra ... udio-setup
The audio is being played through the Braincrafts builtin speaker.
https://learn.adafruit.com/adafruit-bra ... udio-setup
- jprema
- Posts: 4
- Joined: Sun Jun 13, 2021 5:50 pm
Re: Machine Learning Camera
Thanks for the info. Just need the part # for the speaker and wires shown in the screen shot.
Thanks
Thanks
- Attachments
-
- MCL Assembly.jpg (260.66 KiB) Viewed 138 times
- mikeysklar
- Posts: 14194
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Machine Learning Camera
You will need to purchase a JST PH 2-pin cable and I'm pretty sure this is the speaker used in the project ( Speaker - 40mm Diameter - 4 Ohm 3 Watt ):
https://www.adafruit.com/product/261
https://www.adafruit.com/product/3968
https://www.adafruit.com/product/261
https://www.adafruit.com/product/3968
- jprema
- Posts: 4
- Joined: Sun Jun 13, 2021 5:50 pm
Re: Machine Learning Camera
Excellent. Appreciate the assistance.
Thanks.
Thanks.
Please be positive and constructive with your questions and comments.