Custom SAMD51 Board Help

General project help for Adafruit customers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Legocanavari
 
Posts: 1
Joined: Sun Jul 25, 2021 4:23 pm

Custom SAMD51 Board Help

Post by Legocanavari »

I recently made my first PCB using a ATSAMD51J18A chip. It was mostly based on the Feather M4. There are a couple of different pins and of course the chip is different as well. I got myself a JLink EDU and installed the Microchip Studio. I want to make a custom bin file so that I can upload the bootloader to my board and use it with Arduino IDE. I modified the board.mk and board_config.h files of the Feather M4 and attached the config file to this post. Forum does not accept attaching mk files. How do I convert these to bin?
I followed these tutorials

https://learn.adafruit.com/how-to-progr ... s?view=all
https://www.hackster.io/wallarug/uf2-bo ... rds-c9620c

Any help would be appreciated.
Attachments
board_config.h
(955 Bytes) Downloaded 13 times

Locked
Please be positive and constructive with your questions and comments.

Return to “General Project help”