Adafruit 3.5inch PiTFT Replacement PCB

General project help for Adafruit customers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
EdwinSL101
 
Posts: 10
Joined: Fri Aug 16, 2019 1:43 pm

Adafruit 3.5inch PiTFT Replacement PCB

Post by EdwinSL101 »

Hello. So, I have somewhat a dilemma with my 3.5 PiTFT Plus screen. Long story short, I damaged the PCB rendering my PiTFT useless. So, I was wondering if there was any way I could acquire a PCB replacement from you guys, OR if its possible printing the PCB from somewhere else using the PCB files found on GitHub (https://github.com/adafruit/Adafruit-PiTFT-3.5-Plus-PCB). Any help is very appreciated. =)

User avatar
adafruit_support_mike
 
Posts: 67446
Joined: Thu Feb 11, 2010 2:51 pm

Re: Adafruit 3.5inch PiTFT Replacement PCB

Post by adafruit_support_mike »

We don't sell the PCBs as a separate product.

You could certainly have a board house assemble one from our design files, but that's very likely to cost more than a new PiTFT. Board etching and assembly have a lot of setup costs, so the rule of thumb is that one prototype costs about the same as the first 100.

Locked
Please be positive and constructive with your questions and comments.

Return to “General Project help”