Hi Adafruite team,
Thank you for your support.
Can you let as know pin assignment for 954 (USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi)?
Red
Green
Black
White
I don't know exactly which one is what for.
Thank you for your patience.
Best Regards,
Takashi
T4328391
954 color wires question
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23902
- Joined: Mon Apr 21, 2008 2:33 pm
Re: 954 color wires question
According to the learn page:
https://learn.adafruit.com/adafruits-ra ... s#overview
The red lead should be connected to 5V if you want to power via the cable, see below for details
The black lead to GND (3rd pin down)
The white lead to TXD on the Pi (4th pin down)
The green lead to RXD on the pI (5th pin down)
https://learn.adafruit.com/adafruits-ra ... s#overview
The red lead should be connected to 5V if you want to power via the cable, see below for details
The black lead to GND (3rd pin down)
The white lead to TXD on the Pi (4th pin down)
The green lead to RXD on the pI (5th pin down)
- Takashi69
- Posts: 31
- Joined: Sun May 31, 2020 10:21 pm
Re: 954 color wires question
Thank you so much! Franklyn-san!
Please be positive and constructive with your questions and comments.