Hi Adafruit team,
Thank you for your support.
I have a question about 858 Stepper motor.
https://www.adafruit.com/product/858
This parts changed the spec below,
[before]
513 steps per revolution
Step 1/16 geared down reduction
to
[now]
2052 steps per revolution
Step 1/64 geared down reduction
In this case, we don't know when it was changed and one of our customer wants the version before.
The questions are,
1. Can you provide PCN?
2. Can you let us know when was the change?
Thank you for your patience.
Best Regards,
Takashi
T4340171
858 Stepper motor question
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: 858 Stepper motor question
We're a hobby supply company, and don't issue Product Change Notices.. in many cases we buy devices on the secondary market, and would have to fire off PCNs every time we restocked.
If you need documented hardware, it's best to work directly with a manufacturer or one of the major resellers like Digikey and Mouser. Managing the paperwork for PCNs is part of the service they supply to their market.
If you need documented hardware, it's best to work directly with a manufacturer or one of the major resellers like Digikey and Mouser. Managing the paperwork for PCNs is part of the service they supply to their market.
- Takashi69
- Posts: 35
- Joined: Sun May 31, 2020 10:21 pm
Re: 858 Stepper motor question
Mike-san
I thought so.
Thank you so much!
Best regards,
Takashi
I thought so.
Thank you so much!
Best regards,
Takashi
Please be positive and constructive with your questions and comments.