After waiting about 6 months, I was pumped to finally finish my night vision goggle project. I pull out the LCDs, carefully solder red to red, black to black, and white to yellow (yellow is video output of my foxeer nightcat 3s) I then daisy chained all four together, when I wire it into a 6v output the back of each board popped, one or both transistors exploded on all four boards and now I am getting no video signal, just a white screen, and in some cases nothing at all/
I did everything I was supposed to. I am very distraught over this as I have put dozens of hours of work into this project and after multiple emails to support, and a 6 month waiting period for my product, they arrive and don't work. I have photos if neccesary.
defective 2" lcds
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Park0721
- Posts: 19
- Joined: Thu Jun 23, 2022 10:34 pm
Re: defective 2" lcds
https://youtu.be/OQJSq2AsAQ4
This video shows how nothing is working
I gave the cameras 8.4 volts each. They had more than enough power.
One screen is white, and the other three are a dark grey flashing.
This video shows how nothing is working
I gave the cameras 8.4 volts each. They had more than enough power.
One screen is white, and the other three are a dark grey flashing.
- adafruit_support_carter
- Posts: 29168
- Joined: Tue Nov 29, 2016 2:45 pm
Re: defective 2" lcds
Cross posted:
viewtopic.php?f=8&t=192258
viewtopic.php?f=8&t=192258
Please be positive and constructive with your questions and comments.