There is no USPS pickup on Monday Feb 15th, 2016 because of President's Day. USPS orders placed after 11am EST Fri February 12th will go out Tuesday February 16. UPS orders will ship as normal.

315MHz remote
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

315MHz remote

by xb4r7x on Fri Feb 15, 2013 9:20 pm

Good evening! I purchased your 315MHz remote keyfob but I would rather not have to use one of the receivers you're selling along with it. I already have a 315MHz receiver soldered into a project I'm working on.

I bought the remote to replace the transmitter I made which was much too large for what I wanted. My home-made receiver, however, is just fine.

Basically, I just want to know what information all four of the buttons on the transmitter are actually sending, so I know what to program my receiver to look for.
xb4r7x
 
Posts: 1
Joined: Fri Feb 15, 2013 9:14 pm

Re: 315MHz remote

by zener on Fri Feb 15, 2013 10:29 pm

The decoder protocol needs to match for that to work. About 22 threads down I put the link to the fob encoder data sheet (last post of thread). Barring that you could look at the raw data if you have access to that.

zener
 
Posts: 3057
Joined: Sat Feb 21, 2009 2:38 am

Please be positive and constructive with your questions and comments.