Wiring help for On/Off Button LED Moderators: adafruit_support_bill, adafruit

[vynnski]

Please see the attached image, I'm not sure how to wire the button to turn on the LED while it's powered on. Can anyone help?

Parts used:
- Bluefruit EZ-Key
- Rugged Metal On/Off Switch with Blue LED Ring
- Mini Lipo w/Mini-B USB Jack
- Lithium Ion Polymer Battery - 3.7v 1200mAh

[adafruit_support_bill]

Wire the '-' lug for the LED to GND.
Wire the NO lug of the switch to the '+'lug of the LED.
Wire the C1 (common) lug of the switch to the positive terminal of your power supply.

[vynnski]

Thanks Bill. I have one more issue. When wired as you've described the power button LED is always on, do I just have the wires reversed from the VIN and BAT connections to the switch?

I have BAT wired to NO and VIN wired to C.

[vynnski]

Yep, that was it. All good now!