Good afternoon,
I recently bought an Mini-DIN Connector Cable for iRobot Create 2 and I wanted to know the connections between each cable and the pins. I am attaching the Roomba’s External Serial Port.
In other words, according to the image, I want to know this relation:
Pin 6 - Red cable
Pin 1 - Green cable
And so on..
Thank you,
Gabriel Santos Solia
Mini-DIN Connector Cable for iRobot Create 2
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- soliagabriel
- Posts: 2
- Joined: Thu Feb 25, 2016 3:30 pm
Mini-DIN Connector Cable for iRobot Create 2
- Attachments
-
- Roomba’s External Serial Port.
- DIN Port.png (60.27 KiB) Viewed 3391 times
- adafruit_support_bill
- Posts: 88155
- Joined: Sat Feb 07, 2009 10:11 am
Re: Mini-DIN Connector Cable for iRobot Create 2
[Moved to General Project Help]
The iRobot Create is not a product we sell or support. This sounds like a question for iRobot.
The iRobot Create is not a product we sell or support. This sounds like a question for iRobot.
- soliagabriel
- Posts: 2
- Joined: Thu Feb 25, 2016 3:30 pm
Re: Mini-DIN Connector Cable for iRobot Create 2
But my question is only related to the cable. I just want to know the relation between the 7 output connections in one of the cable's end to the 7 pins in the another cable's end.
- adafruit_support_bill
- Posts: 88155
- Joined: Sat Feb 07, 2009 10:11 am
Re: Mini-DIN Connector Cable for iRobot Create 2
The pinouts on the iRobot end are specified in the diagram. You haven't told us what you are connecting to on the other end.
- tcosta465
- Posts: 2
- Joined: Mon Jul 24, 2017 3:02 pm
Re: Mini-DIN Connector Cable for iRobot Create 2
Hello,
I just bought one of these cables and I have this same question. Can you send me the spec sheet of the cable where it says what wire belongs to what pin?
@soliagabriel, if you already got this information, can you tell where to get it?
Thank you,
Tiago Costa
I just bought one of these cables and I have this same question. Can you send me the spec sheet of the cable where it says what wire belongs to what pin?
@soliagabriel, if you already got this information, can you tell where to get it?
Thank you,
Tiago Costa
- adafruit_support_bill
- Posts: 88155
- Joined: Sat Feb 07, 2009 10:11 am
Re: Mini-DIN Connector Cable for iRobot Create 2
See the data sheet here: https://www.irobotweb.com/~/media/MainS ... .pdf?la=en
- tcosta465
- Posts: 2
- Joined: Mon Jul 24, 2017 3:02 pm
Re: Mini-DIN Connector Cable for iRobot Create 2
If you took the trouble to just read what you sent me, you could see that the information you sent me is not related to the Adafruit cable. It only mentions one from another manufacturer: Tensility International.
I don't understand how you can sell a product that you don't know or have any information about.
If you are replying to your customers´questions, at least you should think about what they are asking for.
Thank you,
Tiago Costa
I don't understand how you can sell a product that you don't know or have any information about.
If you are replying to your customers´questions, at least you should think about what they are asking for.
Thank you,
Tiago Costa
Please be positive and constructive with your questions and comments.