JST-SH 4-pin connector & STEMMA QT colors

[aalm]

Hello,
Im designing a PCB and Im going to use JST SH 4-pin connectors. Im planning to use your STEMMA QT cables.
I would like to follow your coloring.
Red - 3.3VDC Power
Black - Ground
Blue - I2C SDA Data
Yellow - I2C SCL Clock

I cannot find any reference to what numbers the pins have. I have the footprint attached.
Can you please tell me what color is on what pin.
Thank you very much!

[adafruit_support_carter]

The STEMMA QT spec is here:
https://learn.adafruit.com/introducing- ... ical-specs

However, be careful with pin numbering. I think the Adafruit created Eagle PCB parts may not follow JST pin numbering order in all cases - so may be reversed.

Carefully looking at a STEMMA QT cable might help:
https://www.adafruit.com/product/4209

And compare that to JST SH spec:
https://www.jst-mfg.com/product/index.php?series=231

stemma_qt.png (89.84 KiB) Viewed 11 times