I've been extremely busy with school lately, so I wasn't able to check in here lately, but now that I know that the 2010 WB design is finished, I'm ready to make an order. It looks like there are a set of working gerbers that I can send off, so as soon as I find out that there's interest, I'll send them off.
If you want to place an order, send me an email with the following:
Name
Number of Sets
Payment Method (PayPal preferred, Check or Money Order also accepted)
Preferred Shipping Method (USPS Standard is default)
If you have any questions or comments, post or send me an email.
aqisnotliquid [at] gmail [dot] com
Wave Bubble 2010 Board Orders
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- chankster
- Posts: 121
- Joined: Mon Jul 06, 2009 12:59 am
Re: Wave Bubble 2010 Board Orders
How much are you expecting to charge for a set of boards?
- aqisnotliquid
- Posts: 117
- Joined: Mon Oct 06, 2008 10:46 pm
Re: Wave Bubble 2010 Board Orders
Well, based on the prices I get from my manufacturer, I can sell each set of two boards for $8 plus shipping (which would only be about $5 for standard USPS, including international). If you want faster shipping, I can do that, but you'd have to pay extra.
- chankster
- Posts: 121
- Joined: Mon Jul 06, 2009 12:59 am
Re: Wave Bubble 2010 Board Orders
Sent you an email.
-
- Posts: 1
- Joined: Wed May 04, 2011 5:38 am
Re: Wave Bubble 2010 Board Orders
Send you a PM.
BR,
D.G.
BR,
D.G.
-
- Posts: 14
- Joined: Fri Dec 10, 2010 11:45 pm
Re: Wave Bubble 2010 Board Orders
Hey,
When you say set of 2 boards are you referring to 2 full sets to make the wave or 2 boards from the set,
also am i able to get in on this if im in ontario canada and what would i be looking at for shipping?
And are you going to get soldermask stencils made?
When you say set of 2 boards are you referring to 2 full sets to make the wave or 2 boards from the set,
also am i able to get in on this if im in ontario canada and what would i be looking at for shipping?
And are you going to get soldermask stencils made?
- aqisnotliquid
- Posts: 117
- Joined: Mon Oct 06, 2008 10:46 pm
Re: Wave Bubble 2010 Board Orders
When I say two boards, I'm talking about the main board and the battery board. When I'm talking about two sets of boards, it would be two of each board for a total of four.
Yes, I do shipping to Canada. It should still only be $5, but I'd have to double check. I remember having trouble with customs one of the times I shipped something there.
As for the soldermask, I'll take a look at the gerbers. I'm planning to order boards with black soldermask and a white silkscreen.
Yes, I do shipping to Canada. It should still only be $5, but I'd have to double check. I remember having trouble with customs one of the times I shipped something there.
As for the soldermask, I'll take a look at the gerbers. I'm planning to order boards with black soldermask and a white silkscreen.
-
- Posts: 46
- Joined: Fri Apr 22, 2011 3:45 pm
Re: Wave Bubble 2010 Board Orders
i sent mail,
has the WB2010 design been built successfully and validated yet?
SD.
has the WB2010 design been built successfully and validated yet?
SD.
- decoder
- Posts: 3
- Joined: Mon Apr 04, 2011 3:55 pm
Re: Wave Bubble 2010 Board Orders
Please upload photo PCB
- aqisnotliquid
- Posts: 117
- Joined: Mon Oct 06, 2008 10:46 pm
Re: Wave Bubble 2010 Board Orders
I got the impression from Mictronics that the boards are working correctly, and will be using erich81's ports to Eagle and his converted gerbers. I trust their go-ahead. Pictures will be coming in about a week and a half.
-
- Posts: 63
- Joined: Sat Feb 20, 2010 3:16 pm
Re: Wave Bubble 2010 Board Orders
I made two Wave Bubbles 2010 from my schematic and layout. Both are working fine.
-
- Posts: 14
- Joined: Fri Dec 10, 2010 11:45 pm
Re: Wave Bubble 2010 Board Orders
Anyone know of a lowcost place to get stencils made for solder past'n the surface mount stuff
-
- Posts: 94
- Joined: Mon Feb 08, 2010 1:28 pm
Re: Wave Bubble 2010 Board Orders
aqisnotliquid wrote:I don't have a solder stencil, but here's a guide on how you can make one.
http://www.sparkfun.com/tutorials/58
-
- Posts: 14
- Joined: Fri Dec 10, 2010 11:45 pm
Re: Wave Bubble 2010 Board Orders
Thanks,
That looks like a good resource
That looks like a good resource
TheFallen wrote:aqisnotliquid wrote:I don't have a solder stencil, but here's a guide on how you can make one.
http://www.sparkfun.com/tutorials/58
-
- Posts: 3
- Joined: Fri May 20, 2011 4:03 pm
Re: Wave Bubble 2010 Board Orders
Question: is it too late to get in on this?
Please be positive and constructive with your questions and comments.