There is no USPS pickup on Monday Feb 15th, 2016 because of President's Day. USPS orders placed after 11am EST Fri February 12th will go out Tuesday February 16. UPS orders will ship as normal.

Defective Flow Meter?
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Defective Flow Meter?

by 3vilpenguin on Thu Jan 31, 2013 12:01 am

I ordered the arduino capable flow meter, and it doesn't work. I spent a few days troubleshooting it, no luck!

I've successfully had the seeed version a while ago, so I'm sure it's not a bad schematic.

The code is the sample code from https://github.com/adafruit/Adafruit-Flow-Meter
The schematic: arduino Digital 2 to the yellow pin (sensor), 5v (via the arduino 5v pin) to the red input (5v), and grounded to the arduino ground. It picks up 0 for all it's readings.
3vilpenguin
 
Posts: 4
Joined: Mon Jun 11, 2012 10:39 am

Re: Defective Flow Meter?

by adafruit_support_bill on Thu Jan 31, 2013 7:37 am

Is this the plastic or brass-bodied meter? The wiring & code are the same for both & if the Seeed version works in the same circuit, there must be a problem with that unit.

If you contact support@adafruit.com with a link to this thread we can replace that for you.

adafruit_support_bill
 
Posts: 45747
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.