Problem with EEPROM
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- shaadmahmud
- Posts: 2
- Joined: Sat Jan 26, 2013 3:44 pm
Problem with EEPROM
I have one spoke POV but the EEPROM is not working and I could not find 25LC320, in my country they have only 25LC1024. So, my question is can I use 25LC1024 instead of 25LC320?
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Problem with EEPROM
We have had it working with a 25LC256 http://forums.adafruit.com/viewtopic.ph ... 9&p=133617
We don't know if it will work with a larger one.
We don't know if it will work with a larger one.
- shaadmahmud
- Posts: 2
- Joined: Sat Jan 26, 2013 3:44 pm
Re: Problem with EEPROM
so, it will work with 25LC256?
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Problem with EEPROM
As the post says,
the 25LC256 at one point did work and could store 32 images. HOWEVER it is a hacky EXTRA and not guaranteed whatsoever to function
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: Problem with EEPROM
please could you share with us default eeprom.hex ?
regards
regards
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Problem with EEPROM
The firmware source and hex are available on the downloads page: http://www.ladyada.net/make/spokepov/download.html
-
- Posts: 9
- Joined: Wed Oct 02, 2013 2:33 pm
Re: Problem with EEPROM
but there is not eeprom.hexadafruit_support_bill wrote:The firmware source and hex are available on the downloads page: http://www.ladyada.net/make/spokepov/download.html
I would like to write it with just simple avrdude command to my spokePOV to get it in same state as it was new.
Please be positive and constructive with your questions and comments.