To Adafruit support and whoever can help me,
So i have gotten my adafruit CC300 in from adafruit. I have soldered everything up and now i am trying to connect to my home network using the build test example. In the serial monitor display I am getting symbols and numbers displaying for some reason help would be greatly appreciated for my issue. I do have it externally powered when i am using the wifi module. So i cannot see what my issue is with the device.
Please Help
CC300 Giving out Gibberish in Arduino Ide serial monitor
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Junior9902
- Posts: 8
- Joined: Mon Mar 21, 2016 10:10 pm
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: CC300 Giving out Gibberish in Arduino Ide serial monitor
Your sketch calls Serial.begin() with 115200 baud, but the Serial Monitor is only set to 4800 baud.
- Junior9902
- Posts: 8
- Joined: Mon Mar 21, 2016 10:10 pm
Re: CC300 Giving out Gibberish in Arduino Ide serial monitor
Thank you very much that fixed my problem and I had a successful ping to adafruit.com.
Please be positive and constructive with your questions and comments.