Mini-DIN Connector Cable for iRobot Create 2

General project help for Adafruit customers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
soliagabriel
 
Posts: 2
Joined: Thu Feb 25, 2016 3:30 pm

Mini-DIN Connector Cable for iRobot Create 2

Post by soliagabriel »

Good afternoon,

I recently bought an Mini-DIN Connector Cable for iRobot Create 2 and I wanted to know the connections between each cable and the pins. I am attaching the Roomba’s External Serial Port.

In other words, according to the image, I want to know this relation:
Pin 6 - Red cable
Pin 1 - Green cable
And so on..

Thank you,

Gabriel Santos Solia
Attachments
Roomba’s External Serial Port.
Roomba’s External Serial Port.
DIN Port.png (60.27 KiB) Viewed 3349 times

User avatar
adafruit_support_bill
 
Posts: 88040
Joined: Sat Feb 07, 2009 10:11 am

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by adafruit_support_bill »

[Moved to General Project Help]
The iRobot Create is not a product we sell or support. This sounds like a question for iRobot.

User avatar
soliagabriel
 
Posts: 2
Joined: Thu Feb 25, 2016 3:30 pm

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by soliagabriel »

But my question is only related to the cable. I just want to know the relation between the 7 output connections in one of the cable's end to the 7 pins in the another cable's end.

User avatar
adafruit_support_bill
 
Posts: 88040
Joined: Sat Feb 07, 2009 10:11 am

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by adafruit_support_bill »

The pinouts on the iRobot end are specified in the diagram. You haven't told us what you are connecting to on the other end.

User avatar
tcosta465
 
Posts: 2
Joined: Mon Jul 24, 2017 3:02 pm

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by tcosta465 »

Hello,

I just bought one of these cables and I have this same question. Can you send me the spec sheet of the cable where it says what wire belongs to what pin?

@soliagabriel, if you already got this information, can you tell where to get it?

Thank you,
Tiago Costa

User avatar
adafruit_support_bill
 
Posts: 88040
Joined: Sat Feb 07, 2009 10:11 am

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by adafruit_support_bill »


User avatar
tcosta465
 
Posts: 2
Joined: Mon Jul 24, 2017 3:02 pm

Re: Mini-DIN Connector Cable for iRobot Create 2

Post by tcosta465 »

If you took the trouble to just read what you sent me, you could see that the information you sent me is not related to the Adafruit cable. It only mentions one from another manufacturer: Tensility International.

I don't understand how you can sell a product that you don't know or have any information about.

If you are replying to your customers´questions, at least you should think about what they are asking for.

Thank you,
Tiago Costa

Locked
Please be positive and constructive with your questions and comments.

Return to “General Project help”