are there mods for these?
cv+gate in, for controlling as slave eg: from a 202 (would also need accent in...)
accent out, for controlling other/slave with accent input.
feasible/anyone done it?
cv+gate in, accent out
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- isak
- Posts: 835
- Joined: Wed May 27, 2009 3:54 pm
Re: cv+gate in, accent out
Hi
It's all in the wiki except for accent out.
There is an accent in though.
Cheers,
Isak E.
It's all in the wiki except for accent out.
There is an accent in though.
Cheers,
Isak E.
- jonen
- Posts: 2
- Joined: Sat Aug 18, 2018 4:35 pm
Re: cv+gate in, accent out
I have a question regarding the cv in on the mod wiki:
It says to connect a SPDT switch (or switched jack) with one side connected to the tip of the external cv in jack and the middle to pin 5 of ic 11 and the other side of the switch to the point where R89, R88, R90 connect. However, in the schematics that point is already connected to pin 5 of ic11. So one has to cut that trace, right? I does not say so on the mod wiki though. Or am I wrong here?
It says to connect a SPDT switch (or switched jack) with one side connected to the tip of the external cv in jack and the middle to pin 5 of ic 11 and the other side of the switch to the point where R89, R88, R90 connect. However, in the schematics that point is already connected to pin 5 of ic11. So one has to cut that trace, right? I does not say so on the mod wiki though. Or am I wrong here?
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: cv+gate in, accent out
yes, you'd have to cut that connection away
- jonen
- Posts: 2
- Joined: Sat Aug 18, 2018 4:35 pm
Re: cv+gate in, accent out
Thank you so much for your answer, that clarifies things for me.
However, I was wondering, do you know if there is any other information available for equipping the xoxbox with a 'cv in' that controls the amount of env applied as well as another one that regulates the amount of accent (not accent off or on, but rather what the accent knob does).
I got curious as I saw this xoxheart turned into a euromodule: http://www.openmusiclabs.com/projects/x ... index.html
There is also more information http://wiki.openmusiclabs.com/wiki/x0x-heart, but I have trouble deciphering it.
However, I was wondering, do you know if there is any other information available for equipping the xoxbox with a 'cv in' that controls the amount of env applied as well as another one that regulates the amount of accent (not accent off or on, but rather what the accent knob does).
I got curious as I saw this xoxheart turned into a euromodule: http://www.openmusiclabs.com/projects/x ... index.html
There is also more information http://wiki.openmusiclabs.com/wiki/x0x-heart, but I have trouble deciphering it.
Please be positive and constructive with your questions and comments.