The diagram of the pinouts for the I2C connector on the MacroPad is wrong!
https://learn.adafruit.com/assets/103286
The pinout order is the same as the FunHouse, from the top SCL/SDA/3.3V/GND.
ADABOX019 MacroPad I2C diagram has wrong pinout.
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- SpaceCoaster
- Posts: 3
- Joined: Tue Oct 04, 2016 9:38 pm
- adafruit2
- Posts: 22149
- Joined: Fri Mar 11, 2005 7:36 pm
Re: ADABOX019 MacroPad I2C diagram has wrong pinout.
you can use the wire colors to identify pins
- SpaceCoaster
- Posts: 3
- Joined: Tue Oct 04, 2016 9:38 pm
Re: ADABOX019 MacroPad I2C diagram has wrong pinout.
Thanks, I was making some cables and I used the MacroPad pin out diagram as my model. It is wrong!
I reported it as a bug.
I reported it as a bug.
- kattni
- Posts: 132
- Joined: Fri Aug 18, 2017 6:33 pm
Re: ADABOX019 MacroPad I2C diagram has wrong pinout.
Apologies for the inconvenience. I replied on GitHub. The issue was with the Fritzing object which is used for the basis of the PrettyPins images. I have updated both.
- SpaceCoaster
- Posts: 3
- Joined: Tue Oct 04, 2016 9:38 pm
Re: ADABOX019 MacroPad I2C diagram has wrong pinout.
No inconvenience at all. Your documentation is wonderful and very much appreciated! My apologies for spamming it to several places.
Please be positive and constructive with your questions and comments.