I'm wondering if anyone can offer advice on what to do here.
I can connect my Adafruit EyeLights LED Glasses Driver board to my Mac (2019 mac; OS 12.0.1) and the board will power up/glasses light up but I do not see a device load in the finder.
I can see the device by running
Code: Select all
ioreg -p IOUSB -l -w0
I've also made sure that the USB cable isn't an issue; I've used the same one that worked for my Box 019 Macropad.
Any advice? I want to play with this think but have no idea how to get it to mount so that I can tweak the code.
Thanks!
Code: Select all
+-o LED Glasses Driver nRF52840@14200000 <class AppleUSBDevice, id 0x101345073, registered, matched, active, busy 0 (1 ms), retain 14>
{
"sessionID" = 736086984729051
"idProduct" = 33037
"iManufacturer" = 1
"bDeviceClass" = 239
"bMaxPacketSize0" = 64
"bcdDevice" = 256
"iProduct" = 2
"iSerialNumber" = 3
"bNumConfigurations" = 1
"Bus Power Available" = 250
"USB Address" = 1
"Built-In" = No
"locationID" = 337641472
"bDeviceSubClass" = 2
"bcdUSB" = 512
"USB Product Name" = "LED Glasses Driver nRF52840"
"PortNum" = 2
"non-removable" = "no"
"kUSBSerialNumberString" = "3A92F6C963784F9E"
"bDeviceProtocol" = 1
"AppleUSBAlternateServiceRegistryID" = 4315172977
"IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
"IOPowerManagement" = {"DevicePowerState"=0,"CurrentPowerState"=3,"CapabilityFlags"=65536,"BANNED"=4,"DriverPowerState"=3}
"Device Speed" = 1
"USB Vendor Name" = "Adafruit"
"idVendor" = 9114
"kUSBCurrentConfiguration" = 1
"IOGeneralInterest" = "IOCommand is not serializable"
"kUSBProductString" = "LED Glasses Driver nRF52840"
"USB Serial Number" = "3A92F6C963784F9E"
"kUSBVendorString" = "Adafruit"
"IOClassNameOverride" = "IOUSBDevice"
}