Metro M4 Airlift Lite beta.21 wants ESP Module Firmware Upgr

adafruit.io wippersnapper BETA support, discussions, and more!

Moderators: adafruit_support_bill, adafruit

Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
Locked
User avatar
adafruitguy
 
Posts: 209
Joined: Sat Jun 07, 2014 7:52 am

Metro M4 Airlift Lite beta.21 wants ESP Module Firmware Upgr

Post by adafruitguy »

After upgrading my Metro M4 Airlift Lite from beta.20 to beta.21, I am getting the following error, and continuous board reboot...

Code: Select all

[Disconnected]
[Connected]
Subscribing to MQTT topics...
Added sub 0
Added sub 1
Added sub 2
Added sub 3
Added sub 4
Attempting to connect to WiFi...
Please upgrade the firmware on the ESP module to the latest version.
[Disconnected]
[Connected]
Subscribing to MQTT topics...
Added sub 0
Added sub 1
Added sub 2
Added sub 3
Added sub 4
Attempting to connect to WiFi...
Please upgrade the firmware on the ESP module to the latest version.

User avatar
brubell
Learn User Page
 
Posts: 2101
Joined: Fri Jul 17, 2015 10:33 pm

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by brubell »


User avatar
brubell
Learn User Page
 
Posts: 2101
Joined: Fri Jul 17, 2015 10:33 pm

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by brubell »

I'm unable to reproduce the esp module firmware upgrade error on my Metro M4 AirLift Lite. Please try following the steps on this page to upgrade your ESP32 AirLift's firmware: https://learn.adafruit.com/upgrading-es ... -one-board and reinstall beta 21.

However, I am able to get the continuous board reboot (proposed patch is here: https://github.com/adafruit/Adafruit_Wi ... o/pull/205).

I've included a build UF2 from that pull request, could you confirm it works on your end as well?
Attachments
wippersnapper.metro_s2_tinyusb.1.0.0-beta.21-4-g3fa3371.uf2
(1.67 MiB) Downloaded 150 times

User avatar
adafruitguy
 
Posts: 209
Joined: Sat Jun 07, 2014 7:52 am

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by adafruitguy »

That build gives a quick warning on firmware, boots, and connects successfully.

It is still claiming: 1.0.0-beta.20 in wipper_boot_out.txt ???

I will proceed through the passthrough / upgrade procedure.

Boot, firmware notice, success....

Code: Select all

[Connected]
Subscribing to MQTT topics...
Added sub 0
Added sub 1
Added sub 2
Added sub 3
Added sub 4
Please upgrade the firmware on the ESP module to the latest version.
Connecting to: io.adafruit.com
Connect result: 1
MQTT connect packet:
[Lot's of stuff to REDACT]
[Success and lots of happy MQTT ping packets]

User avatar
adafruitguy
 
Posts: 209
Joined: Sat Jun 07, 2014 7:52 am

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by adafruitguy »

Is that image the Metro M4 w/ AirLift or Metro S2?

I am 99% sure I was still running the beta.20 before the ESP AirLift firmware update. It never said it was running anything other than beta.20.

After the ESP module firmware upgrade...

- The pull build keeps reloading as METROM4BOOT only.
- beta.21 no longer shows the ESP firmware version warning, but keeps restarting.
- and, beta.20 still seems reliable, and no longer warnings on the ESP firmware version.

User avatar
brubell
Learn User Page
 
Posts: 2101
Joined: Fri Jul 17, 2015 10:33 pm

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by brubell »

Is that image the Metro M4 w/ AirLift or Metro S2?
Oops, linked the wrong one..
If you go to... https://github.com/adafruit/Adafruit_Wi ... 1669203746 -> click "build-files" -> download zip -> `metro_m4...airliftlite.uf2` should be in there.

It should display on IO as beta.22.

User avatar
adafruitguy
 
Posts: 209
Joined: Sat Jun 07, 2014 7:52 am

Re: Metro M4 Airlift Lite beta.21 wants ESP Module Firmware

Post by adafruitguy »

Got it - thank you.

Up & running, on the Metro M4 w/ AirLift. So far it's doing much better than .21.
Got beta.22 on M4 Metro
Got beta.22 on M4 Metro
Screen Shot 2022-01-10 at 12.38.58 PM.png (202.26 KiB) Viewed 895 times
My PyPortal was having similar issues. Complaining on ESP firmware & frequent reboots. I've upgraded the ESP firmware, and will try out .22 on it as well.

Locked
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.

Return to “Adafruit IO Wippersnapper Beta”