Beta.23 intermittent connection errors & firmware reboots

adafruit.io wippersnapper BETA support, discussions, and more!

Moderators: adafruit_support_bill, adafruit

Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
Locked
User avatar
adafruitguy
 
Posts: 206
Joined: Sat Jun 07, 2014 7:52 am

Beta.23 intermittent connection errors & firmware reboots

Post by adafruitguy »

With Beta.23 I am seeing intermittent WipperSnapper connection errors & firmware reboots, on the following...
  • Adafruit QT Py ESP32-S2
    Adafruit ESP32-S2 Feather
    Adafruit ESP32-S2 TFT Feather
    Adafruit Funhouse ESP32-S2
Here's an example just before from the ESP32-S2 Feather...

Code: Select all

Read data:              @ [0x40], 
Packet Type:            @ [0x40], 
Read data:                [0x02], 
Packet Length:  2
Read data:                [0x00],   [0x84], 
Publish QOS1+ reply:            @ [0x40],   [0x02],   [0x00],   [0x84], 
PUBLISHED!
PING!
MQTT ping packet:
          [0xC0],   [0x00], 
Client sendPacket returned: 2
Read data:                [0xD0], 
Packet Type:              [0xD0], 
Read data:                [0x00], 
Packet Length:  0
PING!
MQTT ping packet:
          [0xC0],   [0x00], 
Client sendPacket returned: 2
FSM_NET_ESTABLISH_MQTT
Connecting to: io.adafruit.com
Connect result: 0
Unable to connect to Adafruit IO MQTT, retrying in 5 seconds...
Connecting to: io.adafruit.com
Connect result: 0
Unable to connect to Adafruit IO MQTT, retrying in 5 seconds...
Connecting to: io.adafruit.com
Connect result: 0
Unable to connect to Adafruit IO MQTT, retrying in 5 seconds...
Connecting to: io.adafruit.com
Connect result: 0
Unable to connect to Adafruit IO MQTT, retrying in 5 seconds...
Connecting to: io.adafruit.com
Connect result: 0
Unable to connect to Adafruit IO MQTT, retrying in 5 seconds...
ERROR [WDT RESET]: ERROR: Unable to connect to Adafruit.IO MQTT, rebooting soon... 
I'm happy to email longer logs, if it's helpful.

My WipperSnapper M4's with Airlift and Huzzah32 appear to not have this issue.

User avatar
brubell
Learn User Page
 
Posts: 2010
Joined: Fri Jul 17, 2015 10:33 pm

Re: Beta.23 intermittent connection errors & firmware reboot

Post by brubell »

Are the connection errors only happening after a successful connection is established?

On io.adafruit.com/monitor, do you see any errors occurring?

User avatar
adafruitguy
 
Posts: 206
Joined: Sat Jun 07, 2014 7:52 am

Re: Beta.23 intermittent connection errors & firmware reboot

Post by adafruitguy »

None.
No Errors
No Errors
Screen Shot 2022-02-07 at 3.56.36 PM.png (17.47 KiB) Viewed 158 times

Locked
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.

Return to “Adafruit IO Wippersnapper Beta”