DSO Nano V3 failed firmware update

Hand tools, soldering irons, scopes, multimeters. Talk about em HERE!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
squeaker
 
Posts: 10
Joined: Sat Oct 03, 2015 2:15 pm

DSO Nano V3 failed firmware update

Post by squeaker »

I attempted to update the firmware on my DSO Nano V3 with firmware from SeeedStudio's site, and now it won't display anything other than the firmware update screen. I've tried every firmware version on their site, several variants from forum threads, and I've compiled the most recent open source version with the NANOV3=1 flag. Nothing works. I'm hoping someone may have the original firmware available, because it's useless at this point.

This is what is displayed:

Code: Select all

seeed studio
Open Hardware Facilitator
 
Serial: (my serial number) Licence: (my license number)
Device Firmware Upgrade V3.45D
Please copy Hex or Bin file to
the DFU virtual USB disk
I do manage to get something other than the firmware update screen if I hold down OK while powering on:

Code: Select all

seeed studio
Open Hardware Facilitator
Hardware: Version 3.02
MCU Type: STM32F103VB
LCM Ctrl: ILI_9341
USB Disk: 2MB Internal
I've reached out to SeeedStudio's support, but based on other forum threads it's unlikely I'll receive a response.

User avatar
squeaker
 
Posts: 10
Joined: Sat Oct 03, 2015 2:15 pm

Re: DSO Nano V3 failed firmware update

Post by squeaker »

Much to my surprise, I heard back from SeedStudio support. They sent along the original firmware for the device... or at least what they say is the original firmware. I can't say for sure because my scope still doesn't work. I'm posting the file here in case it's of help to someone else.

Here's what happens:
* Copy NANO.V4.33.hex to the USB disk
* Disk disappears
* Disk reappears, file is renamed to NANOV4~1.RDY
* Unplug and power cycle the scope
* Back to the firmware upgrade screen

I've asked SeeedStudio if they have any other firmware available to try. Otherwise I think the device is trashed.
Attachments

[The extension hex has been deactivated and can no longer be displayed.]


User avatar
marshaj847
 
Posts: 43
Joined: Wed Jul 31, 2013 6:12 pm

Re: DSO Nano V3 failed firmware update

Post by marshaj847 »

Just curious, does the 4.32 firmware work.
https://www.seeedstudio.com/DSO-Nano-v3.html

User avatar
squeaker
 
Posts: 10
Joined: Sat Oct 03, 2015 2:15 pm

Re: DSO Nano V3 failed firmware update

Post by squeaker »

marshaj847 wrote:Just curious, does the 4.32 firmware work.
https://www.seeedstudio.com/DSO-Nano-v3.html
Unfortunately, it does not.

Locked
Please be positive and constructive with your questions and comments.

Return to “Tools Tools Tools”