I attempted to update the firmware on my DSO Nano V3 with firmware from SeeedStudio's site, and now it won't display anything other than the firmware update screen. I've tried every firmware version on their site, several variants from forum threads, and I've compiled the most recent open source version with the NANOV3=1 flag. Nothing works. I'm hoping someone may have the original firmware available, because it's useless at this point.
This is what is displayed:
Code: Select all
seeed studio
Open Hardware Facilitator
Serial: (my serial number) Licence: (my license number)
Device Firmware Upgrade V3.45D
Please copy Hex or Bin file to
the DFU virtual USB disk
I do manage to get something other than the firmware update screen if I hold down OK while powering on:
Code: Select all
seeed studio
Open Hardware Facilitator
Hardware: Version 3.02
MCU Type: STM32F103VB
LCM Ctrl: ILI_9341
USB Disk: 2MB Internal
I've reached out to SeeedStudio's support, but based on other forum threads it's unlikely I'll receive a response.