Difference in Makecode between CPE & Bluefuit editions

Microsoft's MakeCode platform for easy blocks-style programming

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Sandy_Crack
 
Posts: 51
Joined: Wed Aug 21, 2019 10:34 pm

Difference in Makecode between CPE & Bluefuit editions

Post by Sandy_Crack »

Hi,
Ive been successful using Makecode on CPEs for a few years now.

For a current project the bluetooth abilities of the CP Blufruit edition would be useful.

The problem is that I would like to run multiple ( 3 in this case ) FOREVER loops and can't get it to work. It works fine with the CPE on the programming emulator and device. On the CP Blufruit it works on the programming emulator but not the actual device.

If I "remark out" any 2 of the forever loop and load it onto the CP Blufruit it works

I will attach some sample code so you know what I'm trying to do

Regards,

Rich/Sandy
maker-Forever-tests (4).uf2
(248 KiB) Downloaded 26 times
Screen Shot 2022-07-15 at 1.20.16 pm.jpg
Screen Shot 2022-07-15 at 1.20.16 pm.jpg (78.85 KiB) Viewed 3665 times

Locked
Please be positive and constructive with your questions and comments.

Return to “MakeCode”