Changelog: WipperSnapper Firmware Installer and Design Updat

adafruit.io wippersnapper BETA support, discussions, and more!

Moderators: adafruit_support_bill, adafruit

Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.
Locked
User avatar
brubell
Learn User Page
 
Posts: 2010
Joined: Fri Jul 17, 2015 10:33 pm

Changelog: WipperSnapper Firmware Installer and Design Updat

Post by brubell »

board_selector.png
board_selector.png (322.8 KiB) Viewed 513 times
We’re back with new WipperSnapper features, exciting open-source integrations, and a fresh design language for all of IO!

Read the full blog post here: https://io.adafruit.com/blog/notebook/2 ... gn-update/

User avatar
freddyboomboom
 
Posts: 267
Joined: Wed Feb 16, 2022 7:55 pm

Re: Changelog: WipperSnapper Firmware Installer and Design U

Post by freddyboomboom »

FYI: The New Device page shows the QT Py ESP32-C3 board.

When clicking "Choose Board" for the QT Py ESP32-C3, it changes to a page with a big blue "Get Firmware" button. Clicking the Get Firmware button opens a new page with the web downloader, and the QT Py ESP32-C3 is not one of the four firmware options.

Also, there is no QT Py ESP32-C3 file on the Wippersnapper Releases page on Github: https://github.com/adafruit/Adafruit_Wi ... o/releases

This is all a work in progress, and little mistakes like this are going to happen.

I'm just reporting, it's not a problem for me.

I believe that the QT Py ESP32-C3 being on the New Devices page is the mistake/oversight.

If this should have been a new thread, I apologize.

User avatar
brubell
Learn User Page
 
Posts: 2010
Joined: Fri Jul 17, 2015 10:33 pm

Re: Changelog: WipperSnapper Firmware Installer and Design U

Post by brubell »

freddyboomboom wrote:FYI: The New Device page shows the QT Py ESP32-C3 board.

When clicking "Choose Board" for the QT Py ESP32-C3, it changes to a page with a big blue "Get Firmware" button. Clicking the Get Firmware button opens a new page with the web downloader, and the QT Py ESP32-C3 is not one of the four firmware options.

Also, there is no QT Py ESP32-C3 file on the Wippersnapper Releases page on Github: https://github.com/adafruit/Adafruit_Wi ... o/releases

This is all a work in progress, and little mistakes like this are going to happen.

I'm just reporting, it's not a problem for me.

I believe that the QT Py ESP32-C3 being on the New Devices page is the mistake/oversight.

If this should have been a new thread, I apologize.
Thanks for reporting - we'll be pushing out a new build with the C3 soon. Had an issue getting it off the ground with our web flasher b/c it is a new chip architecture.

User avatar
sanvini
 
Posts: 2
Joined: Mon Jul 25, 2022 11:38 am

Re: Changelog: WipperSnapper Firmware Installer and Design Updat

Post by sanvini »

WipperSnapper firmware downloads successful for QtPy-C3 but on reset, firmware goes into a continuous loop, no LED status, and can hear continuous connect/disconnect sound from the computer.

Can anyone confirm if QtPy-C3 was verified to be working when programmed from Adafruit.io add new device option?

Console log from https://adafruit.github.io/WipperSnappe ... py-esp32c3 attached
Attachments
QtPy_C3_Log.txt
(3.19 KiB) Downloaded 5 times

User avatar
brubell
Learn User Page
 
Posts: 2010
Joined: Fri Jul 17, 2015 10:33 pm

Re: Changelog: WipperSnapper Firmware Installer and Design Updat

Post by brubell »

sanvini wrote: Mon Aug 29, 2022 11:44 pm WipperSnapper firmware downloads successful for QtPy-C3 but on reset, firmware goes into a continuous loop, no LED status, and can hear continuous connect/disconnect sound from the computer.

Can anyone confirm if QtPy-C3 was verified to be working when programmed from Adafruit.io add new device option?

Console log from https://adafruit.github.io/WipperSnappe ... py-esp32c3 attached
Hi could you please file a bug report here: https://github.com/adafruit/Adafruit_Wi ... .md&title=

Thank you

Locked
Forum rules
If you're posting code, please make sure your code does not include your Adafruit IO Active Key or WiFi network credentials.

Return to “Adafruit IO Wippersnapper Beta”