Hello,
I purchased https://www.adafruit.com/product/4099 and I will like to know what are the connector pins. They are big and dented and do not fit in breadboard.
What would be the jack connectors I can use to test on a breadboard?
The white cable jumper is not part of the product, just for reference size.
Thank you,
Pierre
SHT-30 #4099 connector pin
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- rooppoorali
- Posts: 98
- Joined: Sat Jul 16, 2022 12:04 pm
Re: SHT-30 #4099 connector pin
I think the only way to connect this sensor to the breadboard is to solder four male-to-male jumpers.
- Pie2re
- Posts: 16
- Joined: Sun May 29, 2022 12:38 pm
Re: SHT-30 #4099 connector pin
Looking around I see that they are just crimped ferrule sleeves. I should cut the wires and crimp new one that fit a breadboard.
Why was the purpose for the SHT to come with these?
Does anybody know what are the AG gauge for the wires? It is not on this datasheet.
https://cdn-shop.adafruit.com/product-f ... asheet.pdf
Why was the purpose for the SHT to come with these?
Does anybody know what are the AG gauge for the wires? It is not on this datasheet.
https://cdn-shop.adafruit.com/product-f ... asheet.pdf
- adafruit_support_carter
- Posts: 29056
- Joined: Tue Nov 29, 2016 2:45 pm
Re: SHT-30 #4099 connector pin
Yep, those are just crimped ferrules. They are mainly intended for use with screw down terminal blocks, like these:
https://www.adafruit.com/product/724
The ferrules simply keep the stranded wires from becoming a mess.
https://www.adafruit.com/product/724
The ferrules simply keep the stranded wires from becoming a mess.
- Pie2re
- Posts: 16
- Joined: Sun May 29, 2022 12:38 pm
Re: SHT-30 #4099 connector pin
Great, this is going messily forward.
Following a previous post on TPL5110, it is working as expected.
Thank you,
Pierre
Following a previous post on TPL5110, it is working as expected.
Thank you,
Pierre
- Attachments
-
- Screen Shot 2022-09-20 at 9.41.51 AM.png (774.75 KiB) Viewed 23 times
Please be positive and constructive with your questions and comments.