Adafruit OLED buttons through stemmaQT

General project help for Adafruit customers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
CR34T0R
 
Posts: 24
Joined: Wed Aug 31, 2022 8:58 am

Adafruit OLED buttons through stemmaQT

Post by CR34T0R »

Hello,

After reading the documentation, I think the buttons are not supposed to work through StemmaQT, only when stacked on the feather or wired directly, is that correct?

It would be handy if the buttons where also going through stemmaQT.

Thank you.

User avatar
dastels
 
Posts: 15608
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit OLED buttons through stemmaQT

Post by dastels »

What product are you talked about?

Dave

User avatar
CR34T0R
 
Posts: 24
Joined: Wed Aug 31, 2022 8:58 am

Re: Adafruit OLED buttons through stemmaQT

Post by CR34T0R »

Oops, sorry for my late repy, I mean this product:
https://www.adafruit.com/product/4650

User avatar
dastels
 
Posts: 15608
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit OLED buttons through stemmaQT

Post by dastels »

OK, the button are connected directly to GPIO pins on the feather. See the guide for details: https://learn.adafruit.com/adafruit-128 ... ng/pinouts.

You'd need something like a seesaw chip on the board to handle those buttons, as in https://learn.adafruit.com/adafruit-min ... eatherwing.

Dave

Locked
Please be positive and constructive with your questions and comments.

Return to “General Project help”