Hello,
After reading the documentation, I think the buttons are not supposed to work through StemmaQT, only when stacked on the feather or wired directly, is that correct?
It would be handy if the buttons where also going through stemmaQT.
Thank you.
Adafruit OLED buttons through stemmaQT
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dastels
- Posts: 15820
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Adafruit OLED buttons through stemmaQT
What product are you talked about?
Dave
Dave
- CR34T0R
- Posts: 24
- Joined: Wed Aug 31, 2022 8:58 am
Re: Adafruit OLED buttons through stemmaQT
Oops, sorry for my late repy, I mean this product:
https://www.adafruit.com/product/4650
https://www.adafruit.com/product/4650
- dastels
- Posts: 15820
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Adafruit OLED buttons through stemmaQT
OK, the button are connected directly to GPIO pins on the feather. See the guide for details: https://learn.adafruit.com/adafruit-128 ... ng/pinouts.
You'd need something like a seesaw chip on the board to handle those buttons, as in https://learn.adafruit.com/adafruit-min ... eatherwing.
Dave
You'd need something like a seesaw chip on the board to handle those buttons, as in https://learn.adafruit.com/adafruit-min ... eatherwing.
Dave
Please be positive and constructive with your questions and comments.