FeatherWing Proto Dimensions
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- SChancey
- Posts: 3
- Joined: Thu Nov 17, 2022 5:01 pm
FeatherWing Proto Dimensions
I'm looking for a CAD drawing of the FeatherWing Proto PCB. I would like to 3D print an add-on and it would be helpful to know the dimensions of the relative hole locations for alignment and clearance purposes. The 3D part will mount on top of the FeatherWing and I would to provide adequate clearance for parts soldered onto the FeatherWing.
- adafruit_support_carter
- Posts: 29170
- Joined: Tue Nov 29, 2016 2:45 pm
Re: FeatherWing Proto Dimensions
The Eagle CAD files are here:
https://github.com/adafruit/Adafruit-Fe ... r-and-Quad
It's the .brd and .sch named "Proto FeatherWing".
This guide covers using the Eagle files:
https://learn.adafruit.com/accessing-an ... sign-files
If you just want some quick reference to main dimensions, the board follows the Feather specification.
https://learn.adafruit.com/adafruit-fea ... cification
https://github.com/adafruit/Adafruit-Fe ... r-and-Quad
It's the .brd and .sch named "Proto FeatherWing".
This guide covers using the Eagle files:
https://learn.adafruit.com/accessing-an ... sign-files
If you just want some quick reference to main dimensions, the board follows the Feather specification.
https://learn.adafruit.com/adafruit-fea ... cification
- SChancey
- Posts: 3
- Joined: Thu Nov 17, 2022 5:01 pm
Re: FeatherWing Proto Dimensions
Excellent! Thanks so much for the prompt reply.
Please be positive and constructive with your questions and comments.