nOOds Flexible LED

EL Wire/Tape/Panels, LEDs, pixels and strips, LCDs and TFTs, etc products from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
KBY
 
Posts: 4
Joined: Tue Nov 22, 2022 6:26 am

nOOds Flexible LED

Post by KBY »

Hello,

I would like to plug a set of noods Flexible LED by serialize them (total = 4). Is it possible ?

Regards

User avatar
dastels
 
Posts: 15662
Joined: Tue Oct 20, 2015 3:22 pm

Re: nOOds Flexible LED

Post by dastels »

From the guide (https://learn.adafruit.com/noods-uberguide):
nOOds can be connected in series (end-to-end) with a corresponding increase in voltage, e.g. 3V for one nOOd, 6V for two, 9V for three and so forth. You’ll still want a current-limiting resistor. Lower voltages might suffice, e.g. two red nOOds might work from a 5V supply…you’ll have to experiment. Probably best and easiest to work with these as parallel, not serial, components.
Dave

User avatar
KBY
 
Posts: 4
Joined: Tue Nov 22, 2022 6:26 am

Re: nOOds Flexible LED

Post by KBY »

thanks very much dave

Locked
Please be positive and constructive with your questions and comments.

Return to “Glowy things (LCD, LED, TFT, EL) purchased at Adafruit”