Adafruit LSM6DSOX + LIS3MDL FeatherWing SCL & SDA Pins seem backward, as labelled

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
bobbertolino
 
Posts: 8
Joined: Thu Dec 01, 2022 1:16 pm

Adafruit LSM6DSOX + LIS3MDL FeatherWing SCL & SDA Pins seem backward, as labelled

Post by bobbertolino »

Good morning.
I purchased several FeatherWing LIS3MDL boards, specifically - https://www.adafruit.com/product/4565
I was going to stack them with several other FeatherWing components (an esp32-S2 and lcd display)
The SDA/SCL pins on the LIS3MDL board are reverse of what they are on the other two boards. See attached image.
Is this just a labelling glitch?

Thank you,
Bob
Attachments
lis3mdl.png
lis3mdl.png (280.52 KiB) Viewed 37 times

User avatar
dastels
 
Posts: 15656
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit LSM6DSOX + LIS3MDL FeatherWing SCL & SDA Pins seem backward, as labelled

Post by dastels »

As noted on the pinout page in the guide https://learn.adafruit.com/st-9-dof-com ... dl-pinouts:
On the earlier versions of the FeatherWing, SCL and SDA are swapped on the silk. The pins themselves are accurate. The issue is only with the labels printed on the board.
Dave

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”